Top banner

   

Danh mục sản phẩm

ĐỐI TÁC CHÍNH CỦA DPS

 

ĐẠI LÝ CHÍNH THỨC

Authorized Dealer

 

PHỤC VỤ KHÁCH HÀNG

Khu vực miền Nam
 
Ms. Thanh (HCM) 
0906.974.446
sales302@dpsvietnam.com
 
Mr. Văn
0906.934.446
sales1@dpsvietnam.com
 
Mr.Dũng (BD,Đồng Nai )
0932.794.446
sales4@dpsvietnam.com
 
Mr. Nam  
0938.768.385
sales@dpsvietnam.com
 
Khu vực miền Bắc
 
Mr. Bằng (Hà Nội) 
0902.324.446  
sales203@dpsvietnam.com
 
Mr. Văn
0906.934.446
sales1@dpsvietnam.com
 
Mr. Hoàng  
02862960711 
hoangtm@dpsvietnam.com
 
Bộ chỉnh áp điện khí / valve tỷ lệ / Boosters

Bộ chỉnh áp điện khí / valve tỷ lệ / Boosters

[Liên hệ để biết giá sản phẩm]

Còn hàng

Electro-Pneumatic Regulator ITV

Series/CAD Port size Set pressure (MPa)
ITV0000 Built-in
One-touch fitting
φ4,φ5/32		 0.001 to 0.1
0.001 to 0.5
0.001 to 0.9
-1 to -100kPa
ITV1000 1/8,1/4 0.005 to 0.1
0.005 to 0.5
0.005 to 0.9
ITV2000 1/4,3/8
ITV3000 1/4,3/8,1/2
Features
  • Stepless control of air pressure in proportion to electric signals
  • Sensitivity: 0.2 kPa (100 kPa specification)
  • Linearity: ±1% or less (F.S.)
  • Hysteresis: 0.5% or less (F.S.)
  • Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C

 

Electronic Vacuum Regulator ITV

Series/CAD Port size Set pressure (MPa)
ITV209x 1/4 -1.3 to -80
Features
  • Stepless control of vacuum pressure in proportion to electric signals
  • Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C

 

5.0 MPa Maximum Supply Pressure - High Pressure Electro-Pneumatic Regulator ITVX

Series/CAD Port size Set pressure (MPa)
ITVX 3/8 0.01 to 3.0
Features
  • Stepless control of air pressure proportional to an electrical signal
  • Maximum supply pressure: 5.0 MPa
  • Set pressure range: 0.01 to 3.0 MPa
  • Maximum flow rate: 3000 L/min[ANR]
  • Fluid: Air, N2, O2, Ar
  • Wetted parts: Fluorine grease

 

Controller for Electro-Pneumatic Regulator IC

Series/CAD Features
IC
  • Can be mainly used integrated with the ITV0000 series without a display function.
  • Converts digital input signal into analog output signal
  • 10 bit parallel input signal (maximum).
  • Pressure setting of 210 = 1024 points possible.
  • 4 point preset output
  • Applicable in the programming function with up to 20 steps.

 

Compact Proportional Solenoid Valve PVQ

Series/CAD Port size Set pressure (MPa)
PVQ 0 to 5
0 to 6
0 to 75
0 to 100		 Air, inert gas
Features
  • Stepless control of flow rate in proportion to current.
  • Repeatability: 3% or less
  • Hysteresis: 10% or less

 

Electro-Pneumatic Proportional Valve VEF/VEP

Series/CAD Port size
VEF/VEP 1/4,3/8,1/2
Features
  • Stepless control of air flow or pressure by use of electric signals
  • Press-die cushions
  • Pressure control of welding machine and low pressure casting
  • Multi-stage speed control of air cylinder and rotation control of air motor

 

5 Port Electro-Pneumatic Proportional Valve VER

Series/CAD Port size Set pressure (MPa)
VER2000·4000 1/4,3/8,1/2 0.1 to 0.9
Features
  • Stepless control of cylinder and applied pressure
  • Applicable cylinder φ25 to φ125
  • Available for exhaust throttle and B port pressure regulation.

 

Power Amplifier for Electro-Pneumatic Proportional Valve VEA

Series/CAD Features
VEA250
  • Dedicated amplifier for driving an electro-pneumatic proportional valve
  • Low current command signal
  • High dither effect
  • Stabilizing the performance of the electro-pneumatic proportional valve
VEA251
VEA252

 

E-P HYREG® VY1

Series/CAD Port size Set pressure (MPa)
VY1 M5 x 8
1/8,1/4,3/8,1/2,3/4,1,11/4,11/2,2		 0.05 to
Supply pressure
Features
  • Stepless control of pressure by use of electric signals
  • Thrust control of cylinder
  • Flow control of nozzle
  • Pressure control of tank

 

Booster Regulator VBA

Series/CAD Port size Set pressure (MPa)
VBA 1/4,3/8,1/2 VBA10A: 0.2 to 2.0
VBA2xA: 0.2 to 1.0
VBA4xA: 0.2 to 1.0
VBA43A: 0.2 to 1.6
Features
  • Can increase the factory air a maximum of 200 %, power supply not required.
  • Possible to get a maximum of double pressure by connecting air with a factory line. (VBA11A: maximum 4 times)
  • Space-saving type that directly connects air tanks and booster regulators.

 

Air Tank VBAT

Series/CAD Port size Set pressure (MPa)
VBAT 3/8,1/2,3/4 5,10,20,38
Features
  • Compact air tank that can be directly connected with a regulator.
  • Can be used as an independent tank.
  • With a safety valve port. (Optional)

 

Pressure Control Valve AP100

Series/CAD Port size Set pressure (MPa)
AP100 1/8,1/4 0.05 to 0.69 MPa
Features
  • Releases pressure over the set range into an atmosphere and constantly maintains the pressure in a pipe.

Nhập các kí tự bạn nhìn thấy trong hình trên.

Loading...