Vacuum ejector

• Quick response: Response time of the valve 5 ms, vacuum response time 28 ms
• Energy-saving: Air consumption 17% reduced, vacuum pressure reached 21% increased
• Compact / Lightweight: 46 g
• With vacuum pressure switch
• Can copy to up to 10 switches simultaneously.

• Total width: 9.9 mm, Total length: 72.9 mm, Total height: 52.5 mm, Mass: 50 g
• Can be installed on moving parts
• Improved response through shortening of the length of the tube to the pad
• Adaptable for manifold application

• Necessary functions can be combined through a modular design.
• Ideal for electronic parts or small precision parts weighing up to 100 g
• Compatible with ejector systems and the vacuum pump systems
• Adaptable for manifold application

• Necessary functions can be combined through a modular design.
• Double solenoids provide a selfholding function
• Adaptable for manifold application
• Functions such as a digital vacuum switch or a solenoid valve can be selected.
• Compatible with ejector systems and the vacuum pump systems

• Valves and switches are unitized.
• Adaptable for manifold application
• Maximum absorption flow rate is increased by 40%.
• Maximum vacuum pressure -84 kPa

• Solid state timer is implemented to control vacuum release valve.
• Enables common power supply for switch and valve as well as serial transmission of vacuum signals.
• Integrated easy to set time
• Adaptable for manifold application

• Width: 10 mm, Mass: 109 g (single unit, with vacuum pressure switch and suction filter)
• Digital vacuum pressure switch
• With LED display function
• Adaptable for a manifold application

• Nozzle diameters: φ0.5, φ0.7, φ1.0, φ1.3, φ1.5, φ1.8, φ2.0
• Composite formed resin nozzle and body
• Available in series of 2 types: Box type (built-in silencer), and Body ported type

• Vacuum port and supply port are located collinearly to facilitate piping.
• A lightweight construction is achieved through the use of the resin body.
• Nozzle diameter

φ0.5: 6.5 g
φ0.7: 7.0 g

• Built-in one-touch fittings (copper-free countermeasures taken)

• Suction flow rate increased by a 3 stage diffuser construction
• Functions such as a digital vacuum switch or a vacuum pressure gauge can be selected.

• Ejector valve unit suitable for vacuum adsorption system
• Can be combined with valve for cylinder drive.